Due to its exceptional durability, transparency and antifouling properties, Fluon® ETFE FILM (ETFE foil) is used in a wide range of applications including mould releasing films for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and various other innovative and ground-breaking areas where film and foil are finding their uses.




This information sheet contains typical property data which should not be
used for specification purposes.

Fluon® ETFE FILM/FOIL

Test
Unit
ASTM

Fluon® ETFE Film

(Fluon® ETFE Foil)
Mechanical Properties
Specific gravity
-
ASTM D792
1.75
Tensile Strength
MPa
JIS  K7127
over 39
Tensile Elongation
%
JIS  K7127
200-510
Thermal Properies
Melting Point
°C
-
260
Linear Thermal Expansion Coefficient
10-5/°C
ASTM D696
9.4
Flammability
-
-
Non-flammability
Continuous service temperature
°C
150-180
Chemical Properties
Water absorption (23°C, 24hrs)
%
ASTM  D570
0.03
Chemical resistance
-
ASTM  D543
excellent
Electrical Properties
Volume specific resistance
omega·cm
ASTM  D257
1017
Dielectric constant (23°C, 1MHz)
-
ASTM  D150
2.6
Dielectric tangent
-
ASTM  D150
60Hz
0.0006
1kHz
0.0008
1MHz
0.005
1GHz
0.01
Breakdown voltage
kV/0.1mm
ASTM  D149
12
Air resistance
s
ASTM  D495
120

Fluon® is a trademark of Asahi Glass Company

Tel: +31(0) 20 880 4170 (sales office) Fax: +31(0) 20 880 4188
e-mail: enquiries@agcce.com www.agcce.com