1.
2.

3.

4.
Aerospace industry
Slide bearing and valve components
Machined, auto and isostatically moulded parts
Gaskets & diaphragms in chemical process plant
Fluon® granular polytetrafluoroethylene (PTFE) polymers are fabricated
by moulding and ram extrusion. Fine powders are suitable for
applications requiring the very best mechanical or electrical properties.
Agglomerated, free-flowing powders are suitable for general, automatic
or isostatic moulding and extrusion of large sections.


G201 is a pre-sintered grade for extrusion of small sections.


Please contact the sales office for the latest information.











Granular Polymer Grades
Grade
Polymer
Type
Bulk
Density
(g/l)
Flow
(mm)

Flow
(s)

Mean
Particle
Size
(µm)
Preform
Pressure
(MPa)
Shrinkage
(%)
Ultimate Tensile
Strength
(MPa)
Tensile
Elongation
to Break
(%)
Electrical
Breakdown
Voltage
(kV/mm)
Applications
G110
Fine
milled
225
-
-
20
-
-
-
-
-
Principally for
blending with fillers.
G155
Fine
powder
420
-
-
30
16
5
33
350
80
Blending with fillers.
General moulding.
G163
Fine
powder
335
-
-
25
16
5
35
375
90
Blending with fillers.
Billets for skived tape.
G201
Pre-
sintered
extrusion
675
7
4.5
500
Extrusion
only
12
22
330
50
Ram extrusion of
small sections.
G204
Pre-
sintered
homopoly-mer
575
-
-
100
-
-
-
-
-
Principally as an additive, e.g. to coating systems. May be moulded for specialist applications.
Fluon® is a trademark of Asahi Glass Company
Tel: +44(0) 1253 861963 (sales office)
Fax: +44(0) 1253 861950
e-mail: info@agcce.com www.agcce.com