PREMINOL® POLYOL GRADE
Polyols for CASE Polyurethanes (Coating, Adhesive, Sealant and Elastomer) and Polyurethane foam
AGC has a wide range of low monol polyols available which are produced using a unique technology. This technology allows AGC to manufacture ultra-low unsaturated value polyol that increase the chemical and mechanical properties of the CASE polyurethane products and give added value to the final product.
(CASE : Coating/Adhesive/Sealant/Elastomer)
Typical Properties of PREMINOL®
(mPa* at 25°C)
|PREMINOL S 1004F||1||3,300||550||No||CASE/Plasticiser/Synthetic Fluid|
|PREMINOL S 4013F||2||12,000||7,000||No||CASE|
|PREMINOL S 4318F||2||18,000||20,000||No||CASE|
|PREMINOL S 3011||3||10,000||3,000||No||CASE/Plasticiser|
|PREMINOL 5001F||2||4,000||950||Yes||CASE/Shoe Sole|
|PREMINOL 7001K||3||6,000||1,350||Yes||CASE/Shoe Sole|
* Example of unsaturated values: Preminol S1004F (0.006 (m-eq/g)), Conventional Polyol (Mw20000)(0.38(m-eq/g))
*Note: The values shown above are typical values, not guaranteed values.
The above technical data is correct at time of issue 1st November 2014.
Please contact AGC for further updates and the latest information.
AGC reserves the right to revise its product range at any time without prior notice.