PREMINOL® POLYOL GRADE
Polyols for CASE Polyurethanes (Coating, Adhesive, Sealant and Elastomer) and Polyurethane foam
AGC has a wide range of low monol polyols available which are produced using a unique technology. This technology allows AGC to manufacture ultra-low unsaturated value polyol that increase the chemical and mechanical properties of the CASE polyurethane products and give added value to the final product.
(CASE : Coating/Adhesive/Sealant/Elastomer)
Typical Properties of PREMINOL®
Product | Functionality | Molecular Weight |
Viscosity (mPa* at 25°C) |
EO addition | Applications |
PREMINOL S 1004F | 1 | 3,300 | 550 | No | CASE/Plasticiser/Synthetic Fluid |
PREMINOL S 4013F | 2 | 12,000 | 7,000 | No | CASE |
PREMINOL S 4318F | 2 | 18,000 | 20,000 | No | CASE |
PREMINOL S 3011 | 3 | 10,000 | 3,000 | No | CASE/Plasticiser |
PREMINOL 5001F | 2 | 4,000 | 950 | Yes | CASE/Shoe Sole |
PREMINOL 7001K | 3 | 6,000 | 1,350 | Yes | CASE/Shoe Sole |
PREMINOL 7012 | 3 | 10,000 | 3,000 | Yes | CASE |
* Example of unsaturated values: Preminol S1004F (0.006 (m-eq/g)), Conventional Polyol (Mw20000)(0.38(m-eq/g))
*Note: The values shown above are typical values, not guaranteed values.
The above technical data is correct at time of issue 1st November 2014.
Please contact AGC for further updates and the latest information.
AGC reserves the right to revise its product range at any time without prior notice.
AGC CHEMICALS
Polyurethanes Division
Shin-Marunouchi Building
1-5-1 Marunouchi
Chiyoda-ku
Tokyo 100-8405
JAPAN
Tel: +81 3 3218 5404
Email: info@agchp@agc.co.jp
www.agc.com
AGC CHEMICALS AMERICAS, INC.
55 East Uwchlan Avenue
Suite 201,
Exton PA 193411
USA
Tel: + 1-610-423-4300
Email: info@agcchem.com
www.agcchem.com
AGC CHEMICALS EUROPE, LTD.
Commercial centre
Zuidplein 80
1077 VX Amsterdam,
The Netherlands
Tel: +31 (0) 20 880 4170
Email: polyols@agcce.com
www.agcce.com